|
Pre-engineered Metal Buildings (PEB)
Amiya designs, fabricates, supplies and erects pre-engineered metal buildings (PEB) using Plated Portals. Pre-Engineered Building are those which are fully fabricated in the factory after designing and all components are assembled and erected at site with bolts, thereby reducing the time of erection. Factories, godowns, shopping complexes, show rooms, sporting complexes, recreation centers, assembly halls, etc. are covered under Pre-engineered Buildings.The advantages of plated portal steel buildings are:
Larger clear spans ranging from 40M and above
Larger bay spacing thereby reducing the number of foundations and columns
Better metal cladding system for aesthetically attractive structures
Ease of constructing multi-deck structures
Earthquake-resistant
Less dust accumulation
Easy maintenance
Configuration of pre-engineered build systems:
The steel frame structures are designed with welded built up sections
The purlins and runners are made of formed sections generally in the form of 'Z' section except at eaves where purlins are of 'C' section
The roofs can be shielded providing FASCIA at eave level to cover the roof sheet render the appearance of show-rooms
Roof and Sides are generally covered with profiled colour coated galvanised steel sheet of thickness approx. 0.5mm.
These sheets are fixed with purlins and runners with self-tapping screws
Under the roof sheet generally glass wool/rock wool insulation of 50mm thickness is provided
Necessary steel sliding door and/or aluminium windows are provided on sides/end walls per requirement
Sky light panels in the roof are provided by introducing fibre glass reinforced polyester sheets of standard size 1.0M x 3.0M.
Under the roof sheet generally glass wool/rock wool insulation of 50mm thickness is provided.
Additional features:
Monitor System at ridge for ventilation
Mezzanine floor frame structures
Overhead crane system.
|
